Our new Sizzling-Air Rework Station is right here together with a brand new LED Mission Equipment, RPi Picos, and Third-Hand Equipment!
Whats up, everybody! We’re again this week with extra new merchandise! When you stopped by yesterday, you most likely already know concerning the new Raspberry Pi announcement with the addition of wi-fi capabilities and headers on two distinctive Pico boards. On high of that, now we have a model new model of our widespread Sizzling-Air Rework Station with a brand new set of options that modernizes the instrument for todays requirements. Following that, now we have have a brand new LED Mission Equipment that’s excellent for creating minds to begin in electronics, in addition to a brand new third hand package! Alright, let’s leap in and take a more in-depth look!
Properly… that is a brand new approach to put together crème brûlée.
This hot-air rework station is nice for professionals and hobbyists in want of tight temperature tolerances and enormous air flows. This unit shows a digital readout of the particular air temperature with a move price of as much as 23L per minute. This very highly effective unit can be utilized for a number of functions, together with commonplace SMD reflow/restore/elimination, thermal IC stress testing, thermoplastic welding, and shrink-wrapping.
This newest model of the hot-air rework station has some nice enchancment: a brand new temperature vary of 100℃-500℃, an auto sleep perform, and a temperature offset perform.
The Raspberry Pi Pico W builds upon the good cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W options the identical attributes because the Raspberry Pi Pico and in addition incorporates an Infineon CYW43439 wi-fi chip. CYW43439 helps IEEE 802.11 b/g/n wi-fi LAN, and Bluetooth® 5.2. (6/30/2022: Solely Wi-fi LAN is supported on the Pico W for the time being, this will probably be up to date as the brand new options turn into out there)
The Raspberry Pi Pico H is a low-cost, high-performance microcontroller board with versatile digital interfaces. It function the RP2040, which marks Raspberry Pi’s first microcontroller designed in-house. Pico gives minimal (but versatile) exterior circuitry to help the RP2040 chip (flash, crystal, energy provides and decoupling and USB connector). This variation comes with a set of male headers pre-soldered to all through-hole vias and a 3 pin debug connector. The spacing stays 2.54mm and breadboard suitable (much more so now with the addition of the male headers).
The SparkFun LED Mission Equipment is an effective way to get began with programming and {hardware} interplay with the Arduino programming language. Every SparkFun LED Mission Equipment consists of every thing you might want to full seven initiatives that can educate you methods to blink an LED, create an evening mild, make a Simon Says recreation, and extra. You do not want any earlier programming or electronics expertise to make use of this package.
When you want an additional pair of fingers (or three!) to assist with the extra delicate, detailed work, you’ll respect this Magnetic Third-Hand Equipment. Prefect for any digital, soldering, crafting, portray, reproduction, figurine, macro pictures and interest work – or any precision challenge that requires excessive accuracy.
That is it for this week. As at all times, we will not wait to see what you make. Shoot us a tweet @sparkfun, or tell us on Instagram, Fb or LinkedIn. Please be secure on the market, be form to 1 one other, and we’ll see you subsequent week with much more new merchandise!
By no means miss a brand new product!
